[Elecraft] K3 with HRD using CW modes

[Gerald Manthey]

Yes, vox on mcw. Not needed on cwky.
On Nov 11, 2012 4:43 PM, "Ian Kahn - Ham" <km4ik.ian at gmail.com> wrote:

> Don,
>
> The K3 requires VOX be active to send CW.  Please check the K3 user's
> manual under CW operations.
>
> 73,
>
> --Ian
>
> Ian Kahn, KM4IK
> Roswell, GA  EM74ua
> km4ik.ian at gmail.com
> K3 #281, P3 #688
> HRD v5.x/6.0 Test Team
>
> On 11/11/2012 8:31 AM, KD8NNU wrote:
> > I use my K3 with HRD software and have the PTT working with all the
> digital modes except CW.
> >
> > There are four different drop down types in HRD and I have tried them
> all with the PTT.   The only way I get CW to work is using VOX.
> >
> > This makes no difference if I use DATA Mode, USB or LSB, or CW for the
> settings on the K3.
> >
> > So the question is what setting am I missing as I can not send CW
> without VOX on.  Its just computer generated dits and dahs thru a sound
> card no different that any other computer digital mode which works fine for
> me.
> >
> > I can live with VOX but then if I forget to turn it off it creates other
> potential problems.   So basically I am thinking I am missing something in
> the setup.
> >
> >
> >
> > ~73
> > Don
> > KD8NNU
> > -.- -.. ---.. –. –. ..-
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html