[Elecraft] K3 with HRD using CW modes

[Ian Kahn - Ham]

Don,

The K3 requires VOX be active to send CW.  Please check the K3 user's 
manual under CW operations.

73,

--Ian

Ian Kahn, KM4IK
Roswell, GA  EM74ua
km4ik.ian at gmail.com
K3 #281, P3 #688
HRD v5.x/6.0 Test Team

On 11/11/2012 8:31 AM, KD8NNU wrote:
> I use my K3 with HRD software and have the PTT working with all the digital modes except CW.
>
> There are four different drop down types in HRD and I have tried them all with the PTT.   The only way I get CW to work is using VOX.
>
> This makes no difference if I use DATA Mode, USB or LSB, or CW for the settings on the K3.
>
> So the question is what setting am I missing as I can not send CW without VOX on.  Its just computer generated dits and dahs thru a sound card no different that any other computer digital mode which works fine for me.
>
> I can live with VOX but then if I forget to turn it off it creates other potential problems.   So basically I am thinking I am missing something in the setup.
>
>
>
> ~73
> Don
> KD8NNU
> -.- -.. ---.. –. –. ..-
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html