[Elecraft] K3 and TRlog
W0MU Mike Fatchett
w0mu at w0mu.com
Sun May 27 00:00:53 EDT 2012
I love N1MM I believe TR4W is a very close approximation to TR but for
windows.
Good luck!
Mike W0MU
W0MU-1 CC Cluster w0mu.net:23 or w0mu-1.dnsdynamic.com
Http://www.w0mu.com
On 5/26/2012 9:52 PM, Scott Manthe wrote:
> TRLog hasn't been updated since 2006, so I'd consider trying to convince
> the fellows in the club that it's time to move on to one of the many
> more modern contest loggers. When I used Windows, I used N1MM, but the
> are many others that are still supported by their developers.
>
> 73,
> Scott, N9AA
>
>
> On 5/26/12 10:43 PM, david Moes wrote:
>> Our club has been using TRlog for many years for Field Day and plan to
>> continue to use it for several good reasons. for the most part they
>> are using it stand alone without a rig connection other than keying
>> CW. in comes the K3 and the possibility of simple rig control and
>> here is the problem.
>>
>> there seems to be some odd reactions when band changes are made TRlog
>> fails to show it without delay. often the frequency display on TRlog
>> will go blank and then show up again at either the new or old frequency
>> then finally will settle down and show the correct info after 10 or 20
>> seconds. Also band changes at TRlog don't work I can only change it
>> at the rig. this is running it under windows. if I boot into DOS
>> 7.1 and run TRlog it all seems to work fine. I don't really know
>> where the disconnect is something to do with windows Im sure it acts
>> the same whether running XP or window 7. has anyone run into this
>> and better does anyone know of a fix I fooled around with some of the
>> polling delays to no effect.
>>
>> Here is the related section from the log.cfg as used I used Kenwood
>> rig for the K3 as its recomended by TRlog.
>>
>> RADIO ONE CONTROL PORT = SERIAL 1
>> RADIO ONE BAUD RATE 4800
>> RADIO ONE TYPE TS850
>>
>> and the K3 is of course set for 4800 as well
>>
>> I am thinking that the ultimate answer will be to run it from DOS but
>> Id rather use windows so that I can use other applications as well.
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
More information about the Elecraft
mailing list