[Elecraft] New K3 Firmware: Improved AGC (great for pile-ups aswell as general operation)

[Rick Bates]

Hi Guy,

Lyle also contacted me and it's appearing that AGC THR at 16 is not allowing
a 15 db signal (P3) to not get notched.  It works beautifully at THR 7,
completely gone.

I sat and watched as both DSP were updated and it shows the appropriate
codes on the display.

It's likely along the lines of me not fully understanding what I'm doing.
;-)

73,
Rick

-----Original Message-----
From: Guy Olinger K2AV

I have 4.51 in and the auto notch is working fine.

Did your log on the utility show the DSP transferring as well?  You
need to use the transfer all files.  On my CONFIG: FW REVS do I have
uC=04.51, d1=02.76, d2=02.76, FL=01.15, dr=01.03

I checked the contents of the zip in the beta directory with the zip
of 4.51 distributed to pre-beta testers and they look the same.

73, Guy

On Mon, May 14, 2012 at 2:03 PM, Rick Bates <happymoosephoto at gmail.com>
wrote:
> I think the new AGC sounds great.  However, auto-notch is no longer
working.
> I can manually notch, but auto mode does nothing (LSB).
>
> Firmware is 4.51 and I've also installed the latest DSP firmware (in both
> DSP).  I've also cycled the power, no change.
>
> AGC DCY Nor
> AGC Hold        0.00
> AGC PLS Nor
> AGC SLP 000 (tried 001, same results)
> AGC THR 016 (tried different values, no change)
> AGC F           120
> AGC S           020
>
> Rick wa6nhc
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html