[Elecraft] New K3 Firmware: Improved AGC (great for pile-ups aswell as general operation)
Guy Olinger K2AV
olinger at bellsouth.net
Mon May 14 14:47:24 EDT 2012
I have 4.51 in and the auto notch is working fine.
Did your log on the utility show the DSP transferring as well? You
need to use the transfer all files. On my CONFIG: FW REVS do I have
uC=04.51, d1=02.76, d2=02.76, FL=01.15, dr=01.03
I checked the contents of the zip in the beta directory with the zip
of 4.51 distributed to pre-beta testers and they look the same.
73, Guy
On Mon, May 14, 2012 at 2:03 PM, Rick Bates <happymoosephoto at gmail.com> wrote:
> I think the new AGC sounds great. However, auto-notch is no longer working.
> I can manually notch, but auto mode does nothing (LSB).
>
> Firmware is 4.51 and I've also installed the latest DSP firmware (in both
> DSP). I've also cycled the power, no change.
>
> AGC DCY Nor
> AGC Hold 0.00
> AGC PLS Nor
> AGC SLP 000 (tried 001, same results)
> AGC THR 016 (tried different values, no change)
> AGC F 120
> AGC S 020
>
> Rick wa6nhc
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
More information about the Elecraft
mailing list