[Elecraft] W2 PTT

[DGB]

I do hr the relays cycling upon pwr up, will ck continuity tomorrow.

thanks 73 Dwight NS9I

On 3/29/2012 7:32 PM, Brian & Cyndi wrote:
> Hi, Dwight!
>
> When you power up the W2 and you see the LED's do their test routine,
> the relay for the PTT jacks is also exercised.  You could use an ohm
> meter to measure continuity between the center conductors of the two RCA
> jacks and verify they lose it during power up.  Also listen for two
> cycles of open/closed relay clicking.  If none of this is happening,
> there may be a problem with the W2 main PCB.
>
> Brian, W6FVI
>
>
> On 3/29/2012 4:22 PM, DGB wrote:
>> I just put together a new W2. I'm finding that the Remote PTT Control
>> isn't working. I have the line for the ptt to the amp from the rig
>> broken and plugged into the two ptt ry rca jacks. Text says it should
>> break that line or the ptt when you encounter high swr but it don't. In
>> the configuration utility I have alarm turned on. What am I overlooking?
>>
>> 73 Dwight NS9I
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>