[Elecraft] W2 PTT

[Brian & Cyndi]

Hi, Dwight!

When you power up the W2 and you see the LED's do their test routine, 
the relay for the PTT jacks is also exercised.  You could use an ohm 
meter to measure continuity between the center conductors of the two RCA 
jacks and verify they lose it during power up.  Also listen for two 
cycles of open/closed relay clicking.  If none of this is happening, 
there may be a problem with the W2 main PCB.

Brian, W6FVI


On 3/29/2012 4:22 PM, DGB wrote:
> I just put together a new W2. I'm finding that the Remote PTT Control
> isn't working. I have the line for the ptt to the amp from the rig
> broken and plugged into the two ptt ry rca jacks. Text says it should
> break that line or the ptt when you encounter high swr but it don't. In
> the configuration utility I have alarm turned on. What am I overlooking?
>
> 73 Dwight NS9I
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>