[Elecraft] K3 reset/reboot

[Jack Berry]

Does it accept any commands in the CONFIG menu? Thinking you might be able to reset one item at a time. Slow but.....

Probably by the time you get my message you'll have six other more helpful responses. This is an amazing group. 

Good luck!
Jack - WE5ST

On Mar 23, 2012, at 7:18 PM, Thomas Horsten <thomas at horsten.com> wrote:

> Try restoring an old configuration and/or upgrading the firmware with the
> K3 utility from a PC. Sounds not so good to me though...
> 
> 73, Thomas M0TRN
> 
> On 24 March 2012 00:11, M. <htrn727 at yahoo.com> wrote:
> 
>> My K3 has lost its mind.
>> 
>> The K3 has been sitting off the operating table for a couple of months
>> (sacrilege I know!). Tonight I hooked it back up and powered up and while
>> the display looks ok, none of the buttons function as they should. Most of
>> them do nothing, others are mis-mapped, i.e. Mode ^ toggles ANT1/2, Mode
>> (dwn) toggles RX/ATT, XMIT turns the preamp on and off .....
>> 
>> Tried the Shift/Power Up trick to reset and no joy. Of course it doesn't
>> respond to any serial communications.... Checked the internal coin cell and
>> its ok ...
>> 
>> Any tricks I'm missing? Hopefully not a trip back to the mothership.
>> 
>> 73, Mike N4GU
>> K3 #01710
>> 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html