[Elecraft] KPA500 & RemoteRig

Wed Mar 14 18:09:45 EDT 2012

Molded connectors- no problem, make the connection in the cable behind 
the connector. That is, strip a short section of cable, find the right 
wires, use them.

73, doug

On 14-Mar-12 21:29, D Joyce wrote:
> Hi Brandon:  Since the KPA500-K3 Aux Cable that is currently supplied with
> the KPA-500 has molded connectors, its difficult (or impossible) to modify
> to add the wire as described by Bob.  Will Elecraft, in the future, make
> available an alternate Aux cable with this additional wire?
>
> 73,  Doug Joyce  VE3MV
>
> ----- Original Message -----
> From: "Brandon Hansen"<brandon at elecraft.com>
> To: "David F. Reed"<w5sv.dave at gmail.com>
> Cc:<elecraft at mailman.qth.net>
> Sent: Wednesday, March 14, 2012 3:15 PM
> Subject: Re: [Elecraft] KPA500&  RemoteRig
>
>
>> Hello Dave,
>>
>>      You'll have to wire some pins up manually and create a macro to
>> control the KPA500. I have attached a document by Bob Wolbert explaining
>> this setup in more detail. Let me know how it goes for you.
>>
>> 73 for now
>> Brandon Hansen, KG6YPI
>> K3-Remote Support
>> Elecraft
>>
>> On 3/14/2012 10:04 AM, David F. Reed wrote:
>>> Is there a command (or maybe will be made available) that can act as the
>>> OPER/STBY switch on the KPA500 via the K3, to make that work using
>>> RemoteRig?
>>>
>>> Perhaps I missed something?
>>>
>>> Thanks&   73 de Dave, W5SV
>>> ______________________________________________________________
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>