[Elecraft] KPA500 & RemoteRig

D Joyce d_joyce at sympatico.ca
Wed Mar 14 17:29:01 EDT 2012


Hi Brandon:  Since the KPA500-K3 Aux Cable that is currently supplied with 
the KPA-500 has molded connectors, its difficult (or impossible) to modify 
to add the wire as described by Bob.  Will Elecraft, in the future, make 
available an alternate Aux cable with this additional wire?

73,  Doug Joyce  VE3MV

----- Original Message ----- 
From: "Brandon Hansen" <brandon at elecraft.com>
To: "David F. Reed" <w5sv.dave at gmail.com>
Cc: <elecraft at mailman.qth.net>
Sent: Wednesday, March 14, 2012 3:15 PM
Subject: Re: [Elecraft] KPA500 & RemoteRig


> Hello Dave,
>
>     You'll have to wire some pins up manually and create a macro to
> control the KPA500. I have attached a document by Bob Wolbert explaining
> this setup in more detail. Let me know how it goes for you.
>
> 73 for now
> Brandon Hansen, KG6YPI
> K3-Remote Support
> Elecraft
>
> On 3/14/2012 10:04 AM, David F. Reed wrote:
>> Is there a command (or maybe will be made available) that can act as the
>> OPER/STBY switch on the KPA500 via the K3, to make that work using
>> RemoteRig?
>>
>> Perhaps I missed something?
>>
>> Thanks&  73 de Dave, W5SV
>> ______________________________________________________________



More information about the Elecraft mailing list