[Elecraft] K3 a few new user questions

[Heinz Baertschi]

Phil,

Setting the SignaLink jumper to increase the gain of the TX signal is
necessary (as explained by Don).
My settings: SignaLink USB TX knob set to 13 o'clock and K3 Mic Line level
set to 30.

73, Heinz  HB9BCB



Phil Hystad-3 wrote
> 
> I use the Signalink with the K3 and I found that I had to have a larger
> line level output from the Signalink.  Inside the Signalink is a jumper
> that allows you to switch to a higher voltage.  Before I did this, the
> level was not high enough to drive the K3.  I don't know if this is a
> universal problem or something that merely worked for me in my
> configuration.
> 
> 73, phil, K7PEH
> 
> 


--
View this message in context: http://elecraft.365791.n2.nabble.com/K3-a-few-new-user-questions-tp7348177p7352152.html
Sent from the Elecraft mailing list archive at Nabble.com.