[Elecraft] K3 a few new user questions

[Don Wilhelm]

Phil,

This is not a problem at all, but it is a matter of audio levels as well 
as knowing your equipment.

The SignaLink is capable of providing either Line level audio or 
Microphone level audio.
The SignaLink off-the-shelf is plugged for microphone level audio.

If you choose to use a Line level input to the transceiver, you must 
change the jumper - not a problem, it is just one of those "facts of life".

73,
Don W3FPR

On 3/7/2012 9:44 AM, Phil Hystad wrote:
> I use the Signalink with the K3 and I found that I had to have a larger line level output from the Signalink.  Inside the Signalink is a jumper that allows you to switch to a higher voltage.  Before I did this, the level was not high enough to drive the K3.  I don't know if this is a universal problem or something that merely worked for me in my configuration.
>
> 73, phil, K7PEH
>
>