[Elecraft] P3 monitoring transmit?

[N2BC]

Something lurking in the future too... one of the empty cutouts on the back
of the P3 is:  "Sensor"

73  Bill  N2BC   (waiting for P3SVGA - then SENSOR)

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of nr4c
Sent: Wednesday, March 07, 2012 8:47 AM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] P3 monitoring transmit?

I thought it was in the manual.  But I can't find it this morning.

If you unplug the serial cable from the radio (either end)you will be able
to see your transmitted signal.  you may have to adjust scaling, ref level
to get trace you want.  It does work fairly well.  I think this 'feature'
will be dealt with a lot better in a future formware release after the
P3SVGA card ships so keep watch.

...bill  nr4c


On Tue, 6 Mar 2012 17:45:57 -0600, David F. Reed wrote:
> I am wonder if it is possible to look at your transmitted signal with 
> the P3; I only see the receive side.  If so, how?
>
> Thanks & 73 de W5SV, Dave
>
> Sent from my iPad
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html