[Elecraft] P3 monitoring transmit?

[nr4c]

I thought it was in the manual.  But I can't find it this morning.

If you unplug the serial cable from the radio (either end)you will be 
able to see your transmitted signal.  you may have to adjust scaling, 
ref level to get trace you want.  It does work fairly well.  I think 
this 'feature' will be dealt with a lot better in a future formware 
release after the P3SVGA card ships so keep watch.

...bill  nr4c


On Tue, 6 Mar 2012 17:45:57 -0600, David F. Reed wrote:
> I am wonder if it is possible to look at your transmitted signal with
> the P3; I only see the receive side.  If so, how?
>
> Thanks & 73 de W5SV, Dave
>
> Sent from my iPad
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html