[Elecraft] Recalling power output levels with K3

[Oliver Dröse]

That's one for everybody who read the manual! ;-))

You can set independent power levels for each band. Use it myself with my 
tube amp ...

@Wayne:
Maybe you should stop putting that much effort into the (currently KX3) 
manual(s) if nobody is reading them. ;-))

Vy 73, Olli - DH8BQA
http://www.dh8bqa.de




----- Original Message ----- 
From: "Jim Bennett" <w6jhb at mac.com>
To: "Elecraft Reflector" <elecraft at mailman.qth.net>
Sent: Thursday, March 01, 2012 6:51 PM
Subject: Re: [Elecraft] Recalling power output levels with K3


That's one for the Elecraft developers to answer here on the reflector…!

On   Thursday, Mar 1, 2012, at  Thursday, 9:36 AM, K4GM-George wrote:

> But must the K3 be used with a KPA500 for this to occur or is there a 
> command in the config somewhere to tell the K3 to recall a power level for 
> each band so that any amp can be used???
>
> George K4GM
>
> On 3/1/2012 11:58 AM, Jim Bennett wrote:
>> Each band. And it recalls the proper level depending of if the KPA500 is 
>> in standby or operate mode!
>>
>> On   Thursday, Mar 1, 2012, at  Thursday, 8:43 AM, K4GM-George wrote:
>>
>>> Does the K3 recall output levels ONLY when used with the KPA-500 or will
>>> it recall the levels for each band irrespective of the amp used ?
>>>
>>> George K4GM
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>
>>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


-----
eMail ist virenfrei.
Von AVG überprüft - www.avg.de
Version: 2012.0.1913 / Virendatenbank: 2114/4842 - Ausgabedatum: 29.02.2012