[Elecraft] help - firmware hangup
Robert G. Strickland
rcrgs at verizon.net
Sat Jun 30 13:10:57 EDT 2012
Bob...
On page 32, KE7X offers that key combination for "initializing
parameters to the default setting." I'm not sure if that applied to my
situation, but I was trying everything. I used that combination to get
the radio to communicate with the Elecraft utility. I had done some
other things, also, like removing a microHAM interface, installing a
usb-serial adapter and running a straight cable. Now, which of these -
including key push/hold - re-established computer-radio comm I can't say
for sure. But, problem is now solved.
Regarding the manual, it's useful. There's a lot of added detail and
discussion of various K3 topics which makes for interesting reading and,
perhaps, better utilization of the radio's capability. YMMV. Have a good
weekend.
...robert
On 6/30/2012 18:32, Bob Cunnings wrote:
> I find nothing in the K3 manual or K3 Utility regarding "PWR on/SHIFT
> LO". Is this a useful undocumented procedure or just voodoo? Perhaps
> the KE7X manual provides a rationale for this action but I don't have
> a copy of it, to date the Elecraft manual has been entirely
> sufficient.
>
> Bob NW8L
>
> -------------------------------------------------------------------------------------------------------
> I have regained comm with the K3 and load 4.51 successfully.
>
> Going through everything, again, I tried the PWR on/SHIFT LO on p 32 of
> the KE7X manual. This time it worked. That enabled comm between computer
> and radio, etc. So, I think this is working. Thanks again to everyone
> for responding. Aside from specific suggestions - all appreciated - just
> having the Elecraft community out there was reassuring which enabled me
> to keep plugging along. That's as good as any specific suggestion.
> Thanks much to all.
>
> ...robert
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
--
Robert G. Strickland, PhD, ABPH - KE2WY
rcrgs at verizon.net
Syracuse, New York, USA
More information about the Elecraft
mailing list