[Elecraft] help - firmware hangup

[iain macdonnell - N6ML]

Bob,

See the section of the K3 Owner's Manual entitled Troubleshooting /
Parameter Initialization

73,

    ~iain / N6ML



On Sat, Jun 30, 2012 at 10:32 AM, Bob Cunnings <bob.cunnings at gmail.com> wrote:
> I find nothing in the K3 manual or K3 Utility regarding "PWR on/SHIFT
> LO". Is this a useful undocumented procedure or just voodoo? Perhaps
> the KE7X manual provides a rationale for this action but I don't have
> a copy of it, to date the Elecraft manual has been entirely
> sufficient.
>
> Bob NW8L
>
> -------------------------------------------------------------------------------------------------------
> I have regained comm with the K3 and load 4.51 successfully.
>
> Going through everything, again, I tried the PWR on/SHIFT LO on p 32 of
> the KE7X manual. This time it worked. That enabled comm between computer
> and radio, etc. So, I think this is working. Thanks again to everyone
> for responding. Aside from specific suggestions - all appreciated - just
> having the Elecraft community out there was reassuring which enabled me
> to keep plugging along. That's as good as any specific suggestion.
> Thanks much to all.
>
> ...robert
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html