[Elecraft] [K3] Gain to KXV3 wideband IF output

[Jack Smith]

-18 dB transfer loss is typical of what I measure.

Solution involves making the mods to the FET follower and in most cases 
adding amplification between the IF output port and the Soft Rock input.

Jack K8ZOA

On 6/26/2012 9:25 AM, Roger Dixon wrote:
> I've finally completed my Soft Rock for use as a pan adapter.  However it is
> rather deaf.
>
>   
>
> On investigation, my measured "gain" from the K3 antenna input to the KXV3
> IF output (terminated in 50 ohms) is -20dB.  Looking at the K3 block/circuit
> diagrams, this would appear to be on the low side.  Is this typical or do I
> need to conduct an internal examination.
>
> {Note I have not done any of the mods to increase the gain}.
>
>   
>
> Roger - G4BVY
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>