[Elecraft] [K3] Gain to KXV3 wideband IF output

[Roger Dixon]

I've finally completed my Soft Rock for use as a pan adapter.  However it is
rather deaf.

 

On investigation, my measured "gain" from the K3 antenna input to the KXV3
IF output (terminated in 50 ohms) is -20dB.  Looking at the K3 block/circuit
diagrams, this would appear to be on the low side.  Is this typical or do I
need to conduct an internal examination.

{Note I have not done any of the mods to increase the gain}.

 

Roger - G4BVY