[Elecraft] K3/0

[Eric Jorgensen]

Just to clarify:

The mic is plugged into the front of the k3/0. The mic cables from the remote rig boxes are plugged into the mono mic jacks on the back of the k3/100 and k3/0 as specified in the instruction manual. 

When you bring up the menu on the k3/0, you are bringing up the menu on the k3/100.  This is clear from the limited instructions that come with the k3/0 as well as what I see when the two boxes are sitting side by side.  I do not know any way to bring up the menu on the k3/0. There are no instructions provided about how to do this of it is even possible. 

I ass u me the mic plug on the front on the k3/0 is hard wired to the mic connector on the back of the k3/0. 

Why the XMIT button keys the k3/100 but no audio passes is a mystery to be solved. 

Thanks
Eric
W1NEJ

Sent from my Apple iPhone

On Jun 9, 2012, at 3:42 PM, D Joyce <d_joyce at sympatico.ca> wrote:

> Eric:
> If you are using the factory cables RRK0CBL, then the microphone (MH2) plugs into the front panel of the K3/0, so I think you need to set the MIC SEL to fP.L (or H)
> 
> 73,  Doug  VE3MV
> 
> ----- Original Message ----- From: "Eric Jorgensen" <eric.jorgensen at me.com>
> To: <elecraft at mailman.qth.net>
> Sent: Saturday, June 09, 2012 2:47 PM
> Subject: [Elecraft] K3/0
> 
> 
>> Got my K3/0 and RemoteRigs this morning.
>> 
>> Everything works perfectly except transmit audio.  MIC SEL is set to rP.L.
>> 
>> Using factory cables, all set up like the book says they should be.
>> 
>> Any ideas?
>> 
>> Thanks
>> 
>> Eric
>> W1NEJ
>> 
>> 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>