[Elecraft] P3/SVGA 1920x1080 Resolution Beta Firmware

[Adrian]

Oscar, have you tried to adjust the new SVGA submenu on the P3; SVGA bias >
set waterfall color bias to about 1.2 or so and you will see the waterfall
define to a blue, determined how much further you adjust.

Adrian ... vk4tux

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Oscar Staudt
Sent: Friday, 8 June 2012 3:10 AM
To: Paul Saffren N6HZ
Cc: elecraft at mailman.qth.net
Subject: Re: [Elecraft] P3/SVGA 1920x1080 Resolution Beta Firmware

Paul,
  The fix works great on my 27" Asus VK728Q monitor.  Works fine in both
full screen and picture in picture.  Prior to this, I was having to use
1440 x 900.  Good work!
  The only slight complaint I have is waterfall part of the display on the
large monitor.  The waterfall brightness/visibility is rather light and less
distinct/bright than on the P3 screen.  The top waveform part of the display
is fine.

Oscar, WB5GCX

On Wed, Jun 6, 2012 at 6:38 PM, Paul Saffren N6HZ <pauls at elecraft.com>wrote:

> For those of you have the P3/SVGA board installed and are trying to 
> use the
> 1920x1080 resolution without success, we have a beta firmware image 
> file available which should resolve the problem.
>
> To perform the update, make sure you have version 1.12.4.26 of the P3 
> Utility installed.  It can be found at:
> http://www.elecraft.com/software/P3/elecraft_p3_software.htm#p3util
>
> Next, download the file 1920x1080_103.zip located in the beta firmware ftp
> directory: ftp://ftp.elecraft.com/P3/firmware/beta/   to a temporary
> folder.
> Extract the 3 files contained in the zip file, you will only be 
> updating one of the files, but the other two are needed for the P3 
> Utility.
>
> Start the P3 utility and click on View and select Advanced Mode.  Next 
> click on the Firmware tab and then the Browse button.  Select the 
> temporary folder you used above.  Click the Check Versions Now button.
> Finally locate the check box next to FPGA 2 and select it.  Make sure 
> no other boxes are
> checked and then click the button marked Send Checked Items to P3.   Once
> the download completes, reboot your P3 and select 1920x1080 from the 
> SVGA menu (if not aalready selected).  Note: you MUST reboot your P3 
> in order for the changes to take effect.
>
>
> If this fixes the 1920x1080 problem, let me know so we put together a 
> formal release.
>
> 73,
>
> Paul
>
> --
> View this message in context:
> http://elecraft.365791.n2.nabble.com/P3-SVGA-1920x1080-Resolution-Beta
> -Firmware-tp7557223.html Sent from the Elecraft mailing list archive 
> at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email
> list: http://www.qsl.net/donate.html
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html