[Elecraft] More info on the SPLIT problem

[Jim Sheldon]

I've also found that if you are IN split with the data display active, you can't exit split (even though the K3's "SPLIT" indicator goes away, it's still using the VFO B frequency for transmit.

So, if you want to use SPLIT and the P3/SVGA data display, disable the display before turning SPLIT on and again before turning SPLIT off.  If you don't do this, split appears to not work properly..

I have no way of determining if the glitch is in the BETA FW or something in the K3's FW that isn't reading commands from the P3/SVGA

Jim - W0EB