[Elecraft] JT-65A modes

[Simon Lewis]

> Now what happens is that it transmitts the message i have selected 
and right about the 48 second mark it drops, then a few seconds later it
 keys up and starts resend the message again but stops when the clock 
hits 00 and goes into receive mode.

are you sure its resending the message or the CW ID

try taking the ID off and see 

Rgds

Simon ZL4PLM 


Check out more information on the world 50 MHz and Up : www.zl4plm.com


> Date: Thu, 19 Jul 2012 19:35:00 -0400
> From: telegrapher at q.com
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] JT-65A modes
> 
> 
> A fellow Elecrafter gave me his number and i called him because i wasn't making any progress with the problem of keying the radio with the WSJT program.  What it came down to was in the configuration table for WSJT.  There is a place for "PTT" port and mine was set on 0.  I suspected that might have something to do with it but had no idea what should be in there.  Ken said his was 3, what a magical number!  It worked for me as well.  So now the radio goes into transmit mode as it should.  End of one problem.
> 
> I am using the Data A mode, USB, Mic-Line is set to ON, VOX Gain at 10, Antivox 000, TX delay 008 (min), PTT Key RTS-DTR
> 
> Now what happens is that it transmitts the message i have selected and right about the 48 second mark it drops, then a few seconds later it keys up and starts resend the message again but stops when the clock hits 00 and goes into receive mode.
> 
> If i was a kid this would be easy but being an old F*** its a bit more time consuming so i appreciate any all exibitions of patience.
> 
> Larry
> W0OGH
> 
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html