[Elecraft] K3 sub receiver no signals

[Cady, Fred]

Hi Mike,
Is it dead-dead or do you get audio noise when turning the audio/rf
gain. If it is dead-dead it might be the l-mix-r setting to a-a or
something other than a-b.
Also, if you have SPKRS=2 and are listening with the internal speaker
you get the main audio only.
Hope you find it.
Cheers,
Fred KE7X
 

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of W0MU Mike
Fatchett
Sent: Sunday, July 01, 2012 10:50 PM
To: Bill Conkling
Cc: 'Elecraft Reflector'
Subject: Re: [Elecraft] K3 sub receiver no signals

The 2nd receiver was hooked up to the bnc aux connector.  I had to
change that.  However still no signals.  I have tried every combination
of antennas etc.

I suspect maybe there was an issue when I uploaded the new firmware.


Mike W0MU

W0MU-1 CC Cluster w0mu.net

On 7/1/2012 9:33 PM, Bill Conkling wrote:
> Check antenna wiring, and make sure you have selected an antenna for 
> the SUB.
>
> ...bill  nr4c
>
> -----Original Message-----
> From: W0MU Mike Fatchett [mailto:w0mu at w0mu.com]
> Sent: Sunday, July 01, 2012 10:32 PM
> To: Elecraft Reflector
> Subject: [Elecraft] K3 sub receiver no signals
>
> I installed this 2nd receiver quite some time ago.  I probably never 
> checked but i hear background noise in the sub receiver but no
signals.
> I suspect this is something stupid, can someone point me in a
direction.
>


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html