[Elecraft] K3: CW in SSB mode broken?

Tue Jan 31 16:35:45 EST 2012

Have you tried plugging a straight key into the KEY jack to see if it sends
cw on ssb that way?

Mine works (v4.39) with a paddle or straight key, vox or ptt, any band.

73, Ted W4NZ

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net]On Behalf Of Frank R. Oppedijk
Sent: Tuesday, January 31, 2012 4:04 PM
To: Elecraft at mailman.qth.net
Subject: Re: [Elecraft] K3: CW in SSB mode broken?

Gary and others,

Yes, I momentarily saw it working okay on 6 meters when I did a brief
transmission on that band.

Unfortunately, as I don't have an antenna for 6 meters, the K3
encountered a high SWR there. And now it outputs only about 5 watts
on each band (also in CW mode) when I've dialed an output power less
than 12W. If I select a power level over 12W, so the KPA100 should
kick in, I get no output whatsoever.

So maybe I broke something now. :-(

Or the cryptic bug has manifested itself in the CW mode too.

Any ideas whether I could do a software reset of the radio?

Fingers crossed here now...

Frank PA4N

At 21:36 31/01/2012, you wrote:
>Hi Frank.
>
>I have the same problem: CW in SSB no longer works on K3#2887 running
>firmware 4.39.  I raised this on the reflector some months back and went
>around the loop changing config settings, PTT, QRQ etc.  I did manage to
fix
>it temporarily by restoring the K3 firmware configs, but annoyingly it has
>packed up again since then.
>
>I *think* CW-in-SSB it might still work on some bands, not others.  At
>least, that's what I found last time I checked - I haven't checked lately.
>
>I suspect there might be a cryptic bug in the firmware (the best kind!).
>
>73
>Gary  ZL2iFB
>
>
> > -----Original Message-----
> > From: elecraft-bounces at mailman.qth.net [mailto:elecraft-
> > bounces at mailman.qth.net] On Behalf Of Frank R. Oppedijk
> > Sent: Wednesday, 1 February 2012 7:48 a.m.
> > To: Elecraft at mailman.qth.net
> > Subject: Re: [Elecraft] K3: CW in SSB mode broken?
> >
> > Hi Ken,
> >
> > No, I think not. If I assert PTT and speak, I see plenty output power.
If
>I
> > switch to CW mode and make CW, I see plenty output power.
> > So it cannot be that...
> >
> >
> > At 19:44 31/01/2012, Rose wrote:
> > >Is the PWR set to "0"?
> > >
> > >73!
> > >
> > >Ken - K0PP
> > ><mailto:ElecraftCovers at gmail.com>ElecraftCovers at gmail.com
> > >On Tue, Jan 31, 2012 at 6:24 PM, Frank R. Oppedijk
> > ><<mailto:frank at qrd.nl>frank at qrd.nl> wrote:
> > >Hi,
> > >
> > >I'm not asserting PTT. If I did, I'd indeed be transmitting SSB, as
> > >can be clearly heard on the monitor. So it must be yet something
else...
> > >
> > >
> > >
> > >At 19:13 31/01/2012, you wrote:
> > > >Even with VOX on, if you assert PTT along with CW keying, you will be
> > > >transmitting in SSB mode, not CW. Try disconnecting PTT and see if it
> > > >works...
> > > >
> > > >     ~iain / N6ML
> > > >
> > > >
> > > >On Tue, Jan 31, 2012 at 10:01 AM, Frank R. Oppedijk
> > > <<mailto:frank at qrd.nl>frank at qrd.nl> wrote:
> > > > > Hi Greg,
> > > > >
> > > > > Yes, I have tried with VOX on. I see the red TX led on the K3 come
> > > > > on, I see the leftmost bar in the RF output lcd bar come on. But
no
> > > > > RF output on my external SWR meter. That SWR *does* show RF
> > output
> > > > > when I speak into the mike, or when I switch to CW mode and make
> > CW.
> > > > >
> > > > >
> > > > > At 18:35 31/01/2012, Greg wrote:
> > > > >>Frank.  Do you have VOX turned on or are you asserting PTT when
> > > > >>sending the CW?
> > > > >>
> > > > >>73
> > > > >>Greg
> > > > >>AB7R
> > > > >>
> > > > >>
> > > > >>On 1/31/12, Frank R. Oppedijk <<mailto:frank at qrd.nl>frank at qrd.nl>
> > wrote:
> > > > >> > Hi group,
> > > > >> >
> > > > >> > Some time ago, I used to be able to send CW while in SSB mode,
>but
> > it
> > > > >> > no longer works. I do have the SSB +CW option on (press 1 in
> > > > >> > CONFIG:CW WGHT), and do have the CW sidetone when I key my
> > paddle
> > > > >> > while in SSB mode. But the K3 does not produce RF output. I'm
>using
> > > > >> > firmware version 04.39.
> > > > >> >
> > > > >> > Did anyone else notice this? Have I missed something?
> > > > >
> > > > >
> > __________________________________________________________
> > ____
> > > > > Elecraft mailing list
> > > > > Home:
> > >
> >
<http://mailman.qth.net/mailman/listinfo/elecraft>http://mailman.qth.net/
> > mailman/listinfo/elecraft
> > > > > Help:
> > <http://mailman.qth.net/mmfaq.htm>http://mailman.qth.net/mmfaq.htm
> > > > > Post: mailto:Elecraft at mailman.qth.net
> > > > >
> > > > > This list hosted by: <http://www.qsl.net/>http://www.qsl.net
> > > > > Please help support this email list:
> > > <http://www.qsl.net/donate.html>http://www.qsl.net/donate.html
> > >
> > >_________________________________________________________
> > _____
> > >Elecraft mailing list
> > >Home:
> >
><http://mailman.qth.net/mailman/listinfo/elecraft>http://mailman.qth.net
> > /mailman/listinfo/elecraft
> > >Help:
> > <http://mailman.qth.net/mmfaq.htm>http://mailman.qth.net/mmfaq.htm
> > >Post: mailto:Elecraft at mailman.qth.net
> > >
> > >This list hosted by: <http://www.qsl.net/>http://www.qsl.net
> > >Please help support this email list:
> > ><http://www.qsl.net/donate.html>http://www.qsl.net/donate.html
> > >
> >
> > __________________________________________________________
> > ____
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html