[Elecraft] P3 and CW signal not aligned perfectly

[nr4c]

On the P3 there is a menu function to calibrate the frequency.  Do this 
and you can set it perfectly.

...bc

On Tue, 24 Jan 2012 07:07:52 -0800 (PST), N0SA wrote:
> I have a K3 with the P3 panadapter.
> When I properly tune a CW signal in and us the SPOT and CW indicator 
> I
> notice that it is not centered in the P3 display. If I center it then 
> it is
> off by about 30 Hz.
> It shows the same offset if I change filters and go to REV CW.
> My SHIFT is centered.
> Is this normal or do I need to check and adjust something?
> Thanks
> Larry Naumann  N0SA
>
>
> --
> View this message in context:
> 
> http://elecraft.365791.n2.nabble.com/P3-and-CW-signal-not-aligned-perfectly-tp7220640p7220640.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html