[Elecraft] Cannot get K3 into USB

[Arie Kleingeld PA3A]

Did you try push&hold ALT to switch sideband?

Arie PA3A

Op 9-1-2012 16:51, Keith Heimbold schreef:
> I ran into an issue this morning when trying to get on 6m that the K3 won't allow me to get on USB.  All modes are accessible besides USB. I then switched to 10m and it was doing the same thing.
>
> On 12m and below the USB selection works. I reloaded firmware but it is still not working.
>
> Last night it was acting glitchy after I was having a long QSO on 2m using the internal transverter. Even when I switched to 40m where by itself it changed frequencies during a QSO.
>
> Any thoughts on what might be going on would be appreciated.
>
> Thanks,
>
> Keith
> AG6AZ
>
> Sent from my iPhone please excuse typos
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>