[Elecraft] K3 macro to put ATU in norm/bypass mode

[Joe Subich, W4TV]

While you're at it, please include control of the Sub RX RX Ant
(RX Ant Hold).

73,

    ... Joe, W4TV


On 2/28/2012 12:26 PM, Wayne Burdick wrote:
> This will require a new command. I've added it to the firmware list.
>
> tnx
> Wayne
> N6KR
>
> On Feb 28, 2012, at 9:22 AM, Arie Kleingeld PA3A wrote:
>
>> Wayne,
>>
>> I sure would like to do this with the RX antennas. Please?
>>
>> 73
>> Arie PA3A
>>
>> Op 28-2-2012 16:52, Wayne Burdick schreef:
>>> Someone recently asked me how to use switch macros to definitively
>>> set
>>> the ATU to normal or bypass mode. Using a switch-emulation command
>>> just alternates between the two--you don't know what the ATU's state
>>> is without looking at the display icon. Here are two unambiguous
>>> command sequences:
>>>
>>>      MN023;MP001;MN255;  bypasses the ATU
>>>
>>>      MN023;MP002;MN255;  puts it inline
>>>
>>> This is a good illustration of the use of the MN and MP commands
>>> (menu
>>> access). For further details see the K3 Programmer's Reference.
>>>
>>> 73,
>>> Wayne
>>> N6KR
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>