[Elecraft] K3 macro to put ATU in norm/bypass mode

[Wayne Burdick]

This will require a new command. I've added it to the firmware list.

tnx
Wayne
N6KR

On Feb 28, 2012, at 9:22 AM, Arie Kleingeld PA3A wrote:

> Wayne,
>
> I sure would like to do this with the RX antennas. Please?
>
> 73
> Arie PA3A
>
> Op 28-2-2012 16:52, Wayne Burdick schreef:
>> Someone recently asked me how to use switch macros to definitively  
>> set
>> the ATU to normal or bypass mode. Using a switch-emulation command
>> just alternates between the two--you don't know what the ATU's state
>> is without looking at the display icon. Here are two unambiguous
>> command sequences:
>>
>>     MN023;MP001;MN255;  bypasses the ATU
>>
>>     MN023;MP002;MN255;  puts it inline
>>
>> This is a good illustration of the use of the MN and MP commands  
>> (menu
>> access). For further details see the K3 Programmer's Reference.
>>
>> 73,
>> Wayne
>> N6KR
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html