[Elecraft] KAT3 Toroids

[Guy Olinger K2AV]

Do not be messing with toroids.  They are NOT there to look pretty.

The manual may not specifically warn against all possible ill-advised
actions in your use of the product.  There are millions of possible
ill-advised things you can do to screw up your product.  DO what the manual
tells you to do and DON'T DO everything else.  Stay to the script.  That's
the one thing Elecraft is writing and updating as carefully as they can.
They put warnings in there when a lot of people are getting involved in the
same screwup. There is no genius anywhere that can correctly anticipate all
the strange things that customers will do.

73, Guy.

On Wed, Feb 22, 2012 at 12:35 PM, Joel Black <joel.b.black at gmail.com> wrote:

> I came home for lunch today and my KAT3 was in the mailbox.  I opened
> the box and the zip-lock bag and was looking at it through the
> anti-static bag and noticed that two of the toroids nearest the
> connector are not perpendicular with the circuit board.  The photo shows
> them perpendicular with the board, parallel with the other toroids.
>
> Just perusing the KAT3 installation manual, I find nothing warning me
> against adjusting the toroids as there is in the K3 assembly manual.  Is
> it safe to make the toroid straight or is it okay as it is?
>
> Thanks,
> Joel - W4JBB
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>