[Elecraft] KAT3 Toroids

[nr4c]

I would leave them alone.  I don't think mine are 'straight' but it 
works.

....bill  nr4c

On Wed, 22 Feb 2012 11:35:39 -0600, Joel Black wrote:
> I came home for lunch today and my KAT3 was in the mailbox.  I opened
> the box and the zip-lock bag and was looking at it through the
> anti-static bag and noticed that two of the toroids nearest the
> connector are not perpendicular with the circuit board.  The photo 
> shows
> them perpendicular with the board, parallel with the other toroids.
>
> Just perusing the KAT3 installation manual, I find nothing warning me
> against adjusting the toroids as there is in the K3 assembly manual.  
> Is
> it safe to make the toroid straight or is it okay as it is?
>
> Thanks,
> Joel - W4JBB
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html