[Elecraft] K3 SteppIR Controller

[a.yoshida]

Hi

Look at following.
Use RS232 connector on K3 rear panel.

http://www.steppir.com/wp-content/uploads/2011/10/Transceiver-Interface-Operation-5-28-09.pdf 


73
aki  ja1nlx


(2012/02/04 8:25), TG9AJR Juan Munoz wrote:
> Sorry, forgot to mention that besides the K3 I also have hooked the P3
> and KPA500
> and the RS232 to USB for my computer.
>
> Do have available the ports on the KPA500, all the other ports on the
> K3 and P3 are in used.
>
> Thanks.
>
> Juan Carlos Munoz.
> TG9AJR
>
>
>
>
> On Fri, Feb 3, 2012 at 5:01 PM, TG9AJR Juan Munoz<tg9ajr at gmail.com>  wrote:
>> I have my K3 and just finishing installing my SteppIR small vertical
>> with the SDA100 Controller
>> and I also order the K3 Transceiver interface connector from the
>> SDA100 Controller to the K3.
>>
>> Does any one knows how is setp up :
>> I assume from the DATA IN/RADIO in the SDA100 Controller to the ? on the K3 ?
>>
>> Thank you and 73
>>
>> Juan Carlos Munoz.
>> TG9AJR
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>