[Elecraft] K3+P3+MkII+computer?

[Don Wilhelm]

Just one caveat that Joe has mentioned several times.  Do not use the 
MicroHam interface for loading firmware - that is when you need your USB 
to serial cable connected to the P3 in place of the MicroHam interface 
RS-232 cable.

73,
Don W3FPR

On 4/30/2012 6:13 PM, Joe Subich, W4TV wrote:
> microHAM interfaces *replace* any other connection to the computer.
>
> With K3/P3, the RS-232 connection from the microHAM interface is
> connected to the "computer" jack on the P3, the radio jack on the
> P3 connects to the K3.  Set K3, P3 and Router all to 38.400 bps.
>
> 73,
>
>      ... Joe, W4TV
>
>
> On 4/30/2012 6:05 PM, cx7tt at 4email.net wrote:
>> Hola,
>>
>> K3 is connected to the P3 and P3 goes to USB hub on back of computer for
>> logging program. How do I include the RS232 to the MkII? Does it require
>> a Y cable for the RS232 or a hub connection like a Belkin? The reason
>> for the MkII is to allow MTTY and PSK macros and to use keyboard cw keying.
>>
>> I cant find anything in the P3 documentation nor on the Microham website
>> under support. Before hooking up the P3, I used the MkII for both
>> Logger32 and N1MM for contesting.
>>
>> 73
>> Tom
>>