[Elecraft] K3+P3+MkII+computer?

[Joe Subich, W4TV]

microHAM interfaces *replace* any other connection to the computer.

With K3/P3, the RS-232 connection from the microHAM interface is
connected to the "computer" jack on the P3, the radio jack on the
P3 connects to the K3.  Set K3, P3 and Router all to 38.400 bps.

73,

    ... Joe, W4TV


On 4/30/2012 6:05 PM, cx7tt at 4email.net wrote:
>
> Hola,
>
> K3 is connected to the P3 and P3 goes to USB hub on back of computer for
> logging program. How do I include the RS232 to the MkII? Does it require
> a Y cable for the RS232 or a hub connection like a Belkin? The reason
> for the MkII is to allow MTTY and PSK macros and to use keyboard cw keying.
>
> I cant find anything in the P3 documentation nor on the Microham website
> under support. Before hooking up the P3, I used the MkII for both
> Logger32 and N1MM for contesting.
>
> 73
> Tom
> CX7TT
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>