[Elecraft] KPA 500 Band buttons inop while rig is connected to Aux port

[ac.ewing at verizon.net]

Jack,
Thank you for pointing that out. I completely overlooked that. I will make  
the menu change when I get home.
73 Alan WA6KEK 

Connected by DROID on Verizon Wireless

-----Original message-----
From: Jack Brindle <jackbrindle at me.com>
To: WA6KEK <ac.ewing at verizon.net>
Cc: elecraft at mailman.qth.net
Sent: Mon, Apr 9, 2012 14:52:38 GMT+00:00
Subject: Re: [Elecraft] KPA 500 Band buttons inop while rig is connected to	 
Aux port

Page 13 of the KPA500 manual explains this. You need to change the Radio  
Menu selection from K3 to BCD. That will disable attempts to communicate  
with a K3 and enable the band buttons.

Jack B, W6FB
Elecraft Engineering

On Apr 8, 2012, at 9:18 PM, WA6KEK wrote:

> Thank you very much for the response Mike. I had a clear understaning  
going
> into this that the KPA was not going to send data to my rig. It was just  
not
> spelled out that the band buttons would be inop. It certainly makes sense
> that they would be. 
> 73 Alan WA6KEK
> 
> --
> View this message in context:  
http://elecraft.365791.n2.nabble.com/KPA-500-Band-buttons-inop-while-rig-is-c 
onnected-to-Aux-port-tp7448434p7448739.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html