[Elecraft] KPA 500 Band buttons inop while rig is connected to Aux port

[Jack Brindle]

Page 13 of the KPA500 manual explains this. You need to change the Radio Menu selection from K3 to BCD. That will disable attempts to communicate with a K3 and enable the band buttons.

Jack B, W6FB
Elecraft Engineering

On Apr 8, 2012, at 9:18 PM, WA6KEK wrote:

> Thank you very much for the response Mike. I had a clear understaning going
> into this that the KPA was not going to send data to my rig. It was just not
> spelled out that the band buttons would be inop. It certainly makes sense
> that they would be. 
> 73 Alan WA6KEK
> 
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/KPA-500-Band-buttons-inop-while-rig-is-connected-to-Aux-port-tp7448434p7448739.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html