[Elecraft] change DATA mode alone

[Dave Perry]

Jorge,

In N1MM, click on Config, then click on top selection Configure Ports, Mode 
Control, etc., click on the Mode Control tab and then look for selection 
under Mode Sent to Radio.  For RTTY to -- select AFSK.

Dave, N4QS



----- Original Message ----- 
From: "Jorge Diez - CX6VM" <cx6vm.jorge at gmail.com>
Cc: <elecraft at mailman.qth.net>
Sent: Sunday, September 25, 2011 8:28 AM
Subject: Re: [Elecraft] change DATA mode alone


Hi Don,

playing a Little more, I noticed that when I click in a callsign in the N1MM
bandmap, the K3 change to FSK D

Will ask in N1MM list

73,
Jorge
CX6VM

-----Mensaje original-----
De: Don Wilhelm [mailto:w3fpr at embarqmail.com]
Enviado el: Domingo, 25 de Septiembre de 2011 03:25 a.m.
Para: Jorge Diez - CX6VM
CC: elecraft at mailman.qth.net
Asunto: Re: [Elecraft] change DATA mode alone

Jorge,

The data sub-modes are remembered per band.  For example, if you set the
K3 to FSK D for 20 meters, and then set to AFSK A for 40 meters, both of
those settings will be remembered.

73,
Don W3FPR

On 9/24/2011 11:31 PM, Jorge Diez - CX6VM wrote:
> Hello,
>
>
>
> I am new in RTTY and settled up my K3 in DATA mode = AFSK A to do few
QSO´s
> during CQWW RTTY contest.
>
> I noticed that sometimes the K3 change alone to FSK D
>
> Do you know why happens this?
>
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html