[Elecraft] K3 Pwr Per Band

[John E. Reiser]

Fred,

Download KPA500 firmware 1.11 to your KPA500.  It will fix the problem.

73,

John


----- Original Message ----- 
From: "Fred Jensen" <k6dgw at foothill.net>
To: "Elecraft Reflector" <elecraft at mailman.qth.net>
Sent: Monday, September 19, 2011 6:24 PM
Subject: [Elecraft] K3 Pwr Per Band


>I thought I understood this.
> 
> Pwr=PerBand
> KPA500=Stby
> K3 Pwr set to 100W
> Hit key, get 100W from K3
> 
> KP500=Operate
> K3 Pwr set to 32W
> Hit key, get 500W from amp
> 
> Now,
> KPA500=Standby
> Hit key, get 32W from K3
> 
> I've never found a technology I couldn't screw up, I seem to be 
> maintaining my record.  Any help?
> 
> 73,
> 
> Fred K6DGW
> - Northern California Contest Club
> - CU in the 2011 Cal QSO Party 1-2 Oct 2011
> - www.cqp.org
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>