[Elecraft] K3: No modulation from front panel mic jack

[Lyle Johnson]

Verify the 5-pin connector between the DSP PCB and the FP PCB are 
mated.  This is located near the headphone jack, mic jack and concentric 
pots. It is very easy to have the male pins slide next to the female 
receptacle rather than engage.

73,

Lyle KK7P

> ... However, SSB from the front jack does not work.  I am using Elecraft MH-2 microphone.  MIC SEL is set to FP.L bIAS.