[Elecraft] K3 Transmitter Gain Cal Failure at 1mW with KXV3a

[Anndel]

Michael,

1. Is the dummy load rated for 50 mhz plus 10-160m?

2. Is the dummy load rated for at least 50 watts?  I'm guessing yes since it
passed the other bands with the KXV3.

73 Delwyn KH6DC

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of N2ZDB at aol.com
Sent: Friday, October 21, 2011 4:55 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] K3 Transmitter Gain Cal Failure at 1mW with KXV3a

Hello K3 Support,
 
I installed the KXV3a tonight into my K3 and when I went to do the 
Gain Calibration it failed on 6 Meters as it was unable to get the required 
 output.
 
Any idea why this output could be low on this band (I believe it only  
reached an 8 out of the expected 10)?
 
Thank you,
 
73's Michael
n2zdb
 
 
 
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html