[Elecraft] Strange Sub Receiver Problem - I must be on Ant 2 in order to receive

[Richard Thorne]

That did the trick Guy, thanks.

Rich - N5ZC

On 10/8/2011 8:40 PM, Guy Olinger K2AV wrote:
> Yes, you have your subreceiver wired to receive on the alternate jack 
> on the KAT3.  This means that a HOLD on RX ANT will flip back and 
> forth between the sub RX listening on the TX antenna or on the NON-TX 
> antenna jack.
>
> Do a hold on RX ANT and you will see either MAIN or AUX.  MAIN is the 
> CURRENT transmit antenna. AUX is the OTHER antenna.
>
> 73, Guy.
>
> On Sat, Oct 8, 2011 at 9:26 PM, Richard Thorne <rmthorne at att.net 
> <mailto:rmthorne at att.net>> wrote:
>
>     I was trying to use the sub receiver today while chasing T32C.  I
>     finally realized that I was not receiving on my sub receiver.
>
>     I only have one antenna and that is connected to antenna 1.
>
>     The only way I can receive a signal on the sub receiver is if I select
>     ant 2, but then I lose all signals on the main receiver.
>
>     In the configuration menu I have the KRX3 set to Ant=Atu.
>
>     Any ideas what may be going on here.
>
>     Thanks
>
>     Rich - N5ZC
>     ______________________________________________________________
>     Elecraft mailing list
>     Home: http://mailman.qth.net/mailman/listinfo/elecraft
>     Help: http://mailman.qth.net/mmfaq.htm
>     Post: mailto:Elecraft at mailman.qth.net
>     <mailto:Elecraft at mailman.qth.net>
>
>     This list hosted by: http://www.qsl.net
>     Please help support this email list: http://www.qsl.net/donate.html
>
>