[Elecraft] Strange Sub Receiver Problem - I must be on Ant 2 in order to receive

[Guy Olinger K2AV]

Yes, you have your subreceiver wired to receive on the alternate jack on the
KAT3.  This means that a HOLD on RX ANT will flip back and forth between the
sub RX listening on the TX antenna or on the NON-TX antenna jack.

Do a hold on RX ANT and you will see either MAIN or AUX.  MAIN is the
CURRENT transmit antenna. AUX is the OTHER antenna.

73, Guy.

On Sat, Oct 8, 2011 at 9:26 PM, Richard Thorne <rmthorne at att.net> wrote:

> I was trying to use the sub receiver today while chasing T32C.  I
> finally realized that I was not receiving on my sub receiver.
>
> I only have one antenna and that is connected to antenna 1.
>
> The only way I can receive a signal on the sub receiver is if I select
> ant 2, but then I lose all signals on the main receiver.
>
> In the configuration menu I have the KRX3 set to Ant=Atu.
>
> Any ideas what may be going on here.
>
> Thanks
>
> Rich - N5ZC
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>