[Elecraft] Running DX Lab on K3

[Tom Azlin N4ZPT]

Mixing communication speeds was exactly what Elecraft said do do with 
the symptoms I was having. it worked fine. Still does. But if you turn 
off the P3 relays connect the lines between the two RS232 so would fail 
then. Works so well have not bothered to switch the computer to P3 
speeds back to 38,400 bps.

73, tom n4zpt

On 10/3/2011 9:25 PM, Joe Subich, W4TV wrote:
>
> DXLab Suite (CI-V Commander) works fine with K3 and P3.  Set Commander,
> the K3 and P3 *all* to 38,400 bps ... there is no problem with either
> the software or hardware.
>
> Do not try to "mix" serial speeds - that's bound to fail.
>
> 73,
>
>      ... Joe, W4TV