[Elecraft] Running DX Lab on K3

[Joe Subich, W4TV]

DXLab Suite (CI-V Commander) works fine with K3 and P3.  Set Commander,
the K3 and P3 *all* to 38,400 bps ... there is no problem with either
the software or hardware.

Do not try to "mix" serial speeds - that's bound to fail.

73,

    ... Joe, W4TV


On 10/3/2011 8:40 PM, Alan Grant wrote:
> I have been trying to run DX Lab on my K3, but have to disconnect the P3
> Pan adaptor, do Elecraft make a double adaptor for the RS232 line, or if
> I buy some RS232 -USB adaptor and plug it into a USB multi adaptor, can I
> run these other applications at the same time as the Pan adaptor?
>
>
>
> Regards
>
> VK4KO
>
> Alan Grant
>
> 73's
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>