[Elecraft] K3/SteppIR setup

[Mike K2MK]

Hi Jack,

See K3 manual page 44 under Automatic Antenna Control.
Set CONFIG:AUTOINF to Auto 1

73,
Mike K2MK



Jack Berry wrote
> 
> Cable from SteppIR is the S-13. I have the Y-cable as well but first just
> trying 
> to get the SDA to track the radio.
> The K3 has been working fine with DX-Lab logger and controller but not
> worried 
> about that yet.
> Tell me about AI, can't find that in the manual.
> 
> Thanks!
> 
> 
> From: "Joe Subich, W4TV" <lists@>
> To: Jack Berry <jlberry@>; Elecraft Reflector 
> <elecraft at .qth>
> Sent: Fri, November 25, 2011 3:33:09 PM
> Subject: Re: [Elecraft] K3/SteppIR setup
> 
> 
> Elecraft uses a modified Kenwood protocol.
> Have you enabled AI mode in the K3 and is a logging program running?
> What cable are you using to connect the K3 to SDA-100?
> Is the SDA-100 "Auto" mode turned on?
> 
> 73,
>     ... Joe, W4TV
> 
> 
> On 11/25/2011 4:27 PM, Jack Berry wrote:
>> Should the Orion or Kenwood mode be selected when using the K3 with
>> SteppIR's
>> SDA-100 controller? Can't get it to work with either mode, just thought I 
> would
>> check with the list.
>>
>> Thanks!
>> Jack - WE5ST
> 


--
View this message in context: http://elecraft.365791.n2.nabble.com/K3-SteppIR-setup-tp7032430p7032454.html
Sent from the Elecraft mailing list archive at Nabble.com.