[Elecraft] K3/SteppIR setup

[Jack Berry]

Cable from SteppIR is the S-13. I have the Y-cable as well but first just trying 
to get the SDA to track the radio.
The K3 has been working fine with DX-Lab logger and controller but not worried 
about that yet.
Tell me about AI, can't find that in the manual.

Thanks!




________________________________
From: "Joe Subich, W4TV" <lists at subich.com>
To: Jack Berry <jlberry at yahoo.com>; Elecraft Reflector 
<elecraft at mailman.qth.net>
Sent: Fri, November 25, 2011 3:33:09 PM
Subject: Re: [Elecraft] K3/SteppIR setup


Elecraft uses a modified Kenwood protocol.

Have you enabled AI mode in the K3 and is a logging program running?

What cable are you using to connect the K3 to SDA-100?

Is the SDA-100 "Auto" mode turned on?


73,

    ... Joe, W4TV


On 11/25/2011 4:27 PM, Jack Berry wrote:
> Should the Orion or Kenwood mode be selected when using the K3 with SteppIR's
> SDA-100 controller? Can't get it to work with either mode, just thought I 
would
> check with the list.
>
> Thanks!
> Jack - WE5ST
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>