[Elecraft] Signalink USB not ALC bars

Rick Bates happymoosephoto at gmail.com
Sun Nov 20 16:51:57 EST 2011


Did you set the K3 to use the rear connector in DATA A mode?

Rick WA6NHC

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Mike Weir
Sent: Sunday, November 20, 2011 1:47 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] Signalink USB not ALC bars


On my K3 I am not getting ALC at all showing on the meter. The signalink
 goes into transmit and my K3 goes into transmit. I am showing on my 
LP-100A an SWR and power going out to the antenna.



I have the Signalink USB and attempting to use it with my Elecraft K3.

I am using:

K3

The K3 inter connecting cable supplied by Tigertronics

HRD V5.0 build 2321 Digital Mater 780

K3 and HRD are connected  through LP-Bridge



What I have done:

The computer (WINXP) has recognized the USB Signalink and has installed it.

The sound and audio devices have been left with the on board PC sound 
card I also have tried changing them to the CODEC signalink card as 
well. 

I have turned off the Windows sound effects...just for the reason they
bother me. 

The properties of the Windows volume control have been set to CODEC in Mixer
device and adjust volume is set to playback. 

In Digital Master I have set it up according to the Tigertronics 
website. I have set the PTT to None and under sound card. Input Receive 
is set to CODEC and output I checked the "Use input device"

The settings on the K3 are as follows

Data A is the mode

Mic gain is set to 50 

Line in is set to 10

RF power is set to 100 watts



Here is what I have tried:

Changing the the K3 to Data PSK31 but that did not get me any ALC.

Turning up the Mic gain no ALC

Turning up the Line in all the way but no ALC



So I am not sure what to try next......

Mike

VE3WDM

 		 	   		  
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html



More information about the Elecraft mailing list