[Elecraft] K3 Firmware Problem - No Proper Menu Readout

[Chris Page]

Thanks Don but I have tried both loading all the software again,and the EEINIT 
option!

I haven't tried reloading the software from a computer with a proper serial 
port as I don't have one!

73 de Chris

On 25 Mar 2011 at 10:30, Don Wilhelm wrote:

>   Chris,
> 
> I would try loading ALL the firmware again - using a real serial port if 
> that is possible.  You could have a bad USB to serial adapter that 
> corrupted the load.
> 
> If all else fails, there is always EEINIT - hopefully you have a saved 
> configuration!
> 
> 73,
> Don W3FPR
> 
> On 3/25/2011 10:22 AM, Chris Page wrote:
> > Sorry Guy, I should have said, but yes, I am using the latest version
> (1.4.1.8)
> >
> > of the K3 Utility program.
> >
> > 73 de Chris, N4CJ (G4BUE)
> >
> > On 25 Mar 2011 at 9:44, Guy Olinger K2AV wrote:
> >
> > Shooting in the dark, but you did not indicate the version of the K3
> utility.
> > Particularly since you went so long without updating the firmware, did you
> > upgrade the K3 utility as well? That would be required before updating the
> > firmware. 73, Guy.
> >
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> >