[Elecraft] K3 Firmware Problem - No Proper Menu Readout

[Don Wilhelm]

  Chris,

I would try loading ALL the firmware again - using a real serial port if 
that is possible.  You could have a bad USB to serial adapter that 
corrupted the load.

If all else fails, there is always EEINIT - hopefully you have a saved 
configuration!

73,
Don W3FPR

On 3/25/2011 10:22 AM, Chris Page wrote:
> Sorry Guy, I should have said, but yes, I am using the latest version (1.4.1.8)
>
> of the K3 Utility program.
>
> 73 de Chris, N4CJ (G4BUE)
>
> On 25 Mar 2011 at 9:44, Guy Olinger K2AV wrote:
>
> Shooting in the dark, but you did not indicate the version of the K3 utility.
> Particularly since you went so long without updating the firmware, did you
> upgrade the K3 utility as well? That would be required before updating the
> firmware. 73, Guy.
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>