[Elecraft] PSK31 transmissions

Greg ab7r at cablespeed.com
Sun Jun 12 19:40:56 EDT 2011


Julian,

Make sure you are using Data-A mode and not PSK-D.  The latter is only for
sending PSK via your CW paddle input (or ascii via a teminal program to the
serial port).  For soundcard programs you must used Data-A.

73
Greg
AB7R


On Sun, Jun 12, 2011 at 3:20 PM, Don Wilhelm <w3fpr at embarqmail.com> wrote:

>  What radio do you have?  How do you have it connected?
> Everything is suspect when you first set something like this up.
> Are you actually in DATA A mode (K3), or if a K2, are you in SSB mode
> (usually USB) - or RTTY mode on the K2?
> Does it work with a less complex software application like Digipan?
> If a K2, is your SSB carrier balance set properly? - you should have no
> carrier if it is correct?
>
> Help with the answers to the above questions and tell us a bit more
> about how you have things set up - interface box if any, soundcard to
> K2/K3 audio connections, etc.  With that information perhaps we can
> help, or at least give you some checkpoints to look at.
>
> 73,
> Don W3FPR
>
> On 6/12/2011 11:56 AM, JULIAN BRADBERRY wrote:
> > I am experiencing a problem trying to transmit PSK messages.  I had a
> friend work with me to determine if I was transmitting both carrier and
> text.  The carrier went out strong and solid but the text did not accompany
> the carrier.  I've checked the Codec settings, text and data setting and
> they are set correctly.  The signal link and power meter indicated that I
> was transmitting OK. But no text. I'm using ham radio deluxe version 5 and
> dm780.   Anybody have any ideas how to overcome this issue?  I have a
> hearing problem so text is the best form of communication for me.
> >
> > WD4FTR
> >
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>


More information about the Elecraft mailing list